by Robyn Bailey (Project Leader), based on material by NestWatcher Lee Pauser
Problem: Large boxes on tall poles
Many people would love to erect nest boxes for Barn Owls, American Kestrels, Wood Ducks, and other large cavity-nesting birds, but find that there isn’t an easy way to clean and maintain them once they’re ten feet up on a pole. I don’t know about you, but I don’t love climbing ladders propped against trees or poles on uneven terrain. Moreover, it’s usually not possible to drive right up to a box and unload your ladder, so the ladder must be carried afield on foot. In discussing this problem with Lee Pauser, a long-time NestWatcher and nest box enthusiast, he shared with me his pulley system that solves the “ladder problem” for about $25-30.
Lee’s plan for the pulley system is thoughtfully laid out and intended for a somewhat handy person with access to specialized tools. You may want to engage the help of a builder if needed. While that might add to the cost initially, think of the years of ladder-toting that you will be spared!
Solution: The Pulley System
At a minimum, you will need to access your nest boxes once a year to clean and refresh the nesting material. Birds such as Barn Owls, American Kestrels, and Wood Ducks do not bring nesting material to the nest, so your initial deployment should include wood shavings as nesting material. Thereafter, these materials can be cleaned out and refreshed after each nesting season. You may also find unhatched eggs or deceased nestlings that should be removed from the box. This is much easier to do three feet off the ground than ten feet high on a ladder. For routine nest box checking, use a ground-based solution rather than raising and lowering the box to monitor for NestWatch.
These videos demonstrate lowering and raising the nest box. Note that this can be done by one steady-handed person.
Tips for Success
- The design is intended for boxes weighing around 25 lbs. Some boxes can weigh up to 75 lbs, and may not be suitable for the components used in this design. Because this pulley system has not been tested for much heavier boxes, we suggest you replace the ABS (plastic) components with metal ones if your box weighs more than 50 lbs.
- Use a 2″ diameter galvanized metal pole in a 12′ length to mount your pulley system. Sink 3′ of the pole into the ground with cement so that the pole’s final height is 9′. If you are concerned about vandalism and/or curiosity, you could increase the pole height to 16′ for more protection.
- If you have multiple boxes, you can attach a winch temporarily so that one winch is not needed per box. This would reduce cost. If you only plan to service one box, then you can leave the winch installed on the pole.
- Although the pole itself is a predator deterrent, snakes and raccoons might still be able to climb to the box. Although no setup can be 100% predator proof, you might wish to fashion a detachable predator guard that can come off when the box is cleaned.
Filed under:
Deprecated: File Theme without comments.php is deprecated since version 3.0.0 with no alternative available. Please include a comments.php template in your theme. in /nas/content/live/dnestwatch/wp-includes/functions.php on line 6031
A specific parts list would be helpful
Hi Charles, If you click on the link to the construction plans in the article, a PDF will pop up with detailed instructions and a parts list. Here’s the link again: https://bit.ly/2SzyCc8.
This is an interesting design but the weight of the box is sitting on the cable all the time. It would be nice to devise a break or stop for the box or pipe clamps to sit on.
Have you had any issues with cable failure?
One Barn Owl nest box with the cable system has been installed for over a year, and functions perfectly. The cables used are those used for garage doors which weigh much more than the nest box. I’ve never had a garage door cable break.